General IQ130 UV LED Curable - Black
Product Discontinued
The direct replacement for this item is IQ430 UV Cure Black Ink .
Please contact us here for current availability of the IQ430.
Please be aware that General IQ130 UV LED Curable - Black is classified as 'HazChem' for shipment and shipping is via Road only and may take additional time to be delivered.
General IQ130 Ink
Product Discontinued
Important Update:
As you may be aware, the IQ130 ink has now been discontinued by the manufacturer due to updated EU regulations and compliance requirements.
The new IQ430 UV Cure Black Ink is now available.
IQ430 is a UV-curable black ink with no SVHCs (REACH 29th update), developed as the direct successor to the IQ130. It offers comparable print quality and improved alcohol resistance, making it ideal for applications in pharmaceuticals, automotive, and electronics.
Please contact us here for pricing and availability of IQ430.
The General IQ130 Ink is the latest generation UV LED curable ink and cures under UV & GLED-1 lamps to produce a highly durable, high gloss print image. This IQ130 pigment ink comes in a 45si type cartridge and has a shelf life of 5 months. General IQ130 is wholly compatible with and now replaces General IQ128 UV ink.
The General IQ130 Ink is a UV LED curable ink and produces a high gloss and highly durable print. If you are currently using the Tritron LC Pro or General IQ128 ink or are new to UV curing applications this is the new generation of UV LED curable inks.
Specifications:
- Cures under 395nm UV lamps to produce a high gloss, highly durable print image
- High Speed Curing :30m / min. GLED-1, 8W/cm2
- The General IQ130 Ink is suitable for PET, PP, PVC, Gloss Card, Special PE, Hard PVC card
- Pigment, 45si type cartridge
- Shelf Life - now 5 months
| Manufacturer : | General |
|---|---|
| Technical Description : | Target Application Applications which require high adhesion and durability. Specifications - Cures under 395nm UV lamps to produce a high gloss, highly durable print image - High Speed Curing: 30m / min. GLED-1, 8W/cm2 - Suitable for PET, PP, PVC, Gloss Card, Special PE, Hard PVC card - Pigment, 45si type cartridge - Shelf Life - 5 months Target Substrate OPP / PET / PE / AL / Aqueous Varnish Coat / Blister Foil / Gravure Print Surfaces / Glass / Rubber / Paper / PVC etc. Settings & Conditions Firing Voltage: 10.0V Pulse Width: 1.7μsec Pulse Warming: OFF Max Frequency: 12kHz Shelf Life: 5 months Storage Temp: 15-35℃ (59-95゜F) Ink Curing Conditions At 300 x 600dpi Storage & Cartridge Maintenance - Shake a clipped cartridge with its head down for 30 seconds, and wipe nozzles gently before use. - After use, attach a gel clip to the cartridge and keep it with its head position UP. When storing, make sure the cartridge is away from any light. - This ink contains alcohol solvent. Make sure the room is well ventilated when this ink is used. - When the nozzles are clogged, wipe them softly with dry lint free cloth or IPA Ethanol soaked cloth. Do not wipe with ink or water soaked cloth. - When cleaning nozzles wipe them gently along with a direction of the nozzles with its head position down. - Do not shake cartridges strongly, especially with no clip. - The print performance varies depending on application or using condition. Conduct enough tests before official use. - Using under the low humidity (Less than 35% RH) is not recommended. - All data here is based on General CO/.LTD's laboratory experiment. Not guaranteed specification. |
Want A Shipping Quote?
• Add The Items To Your Cart• Go To Cart• Add Your Details To 'Estimated Shipping'• Get Your Shipping Quote